Hardware
AT-4
For equipment beyond gateway range
The gateway network covers by far the largest part of an operation. For equipment outside the reach of this gateway network, the AT-4 is the answer: a standalone GPS tracker that shows where an asset is, even without a gateway nearby. Think of remote locations, temporary deployments, or equipment you simply don’t want to lose.
2,000+ industry leaders trust our technology
What the AT-4 does
- Own GPS and 4G: works independently, without a gateway nearby.
- Real-time location: configurable up to one ping per minute.
- Wireless charging: via Qi, up to one and a half years of battery life.
- Geofencing: alerts on unauthorised movement.
- Memory: buffers data when out of range.
- Quick activation: pair it yourself via the app.
- Hybrid IoT ecosystem: all data visible in Flowter.
- No blind spots: even remote equipment stays traceable.
Where the gateway network ends
For most applications, the Asset Tag is the first choice: low cost per asset, eight years of battery life, and coverage through tens of thousands of gateways driving across the Netherlands every day. For equipment that stays at a remote location for longer periods, beyond the reach of any XT-4, the AT-4 is the answer.
Real-time location and buffering
The AT-4 sends its position via 4G directly to Flowter, without the need for a gateway. You decide how often: from once a day to once a minute. No network connection for a while? Nothing gets lost: the tracker stores the locations and sends them as soon as the connection is restored.
Other features
Tab titel
Wireless charging
Thanks to a built-in Qi receiver, you charge the AT-4 wirelessly. At one ping per day, a full battery lasts up to one and a half years. And when the battery drops below 15%, the tracker automatically switches to an energy-saving mode, so the position remains available right up to the end of that period.
Tab titel
Easy activation
You pair the AT-4 with Flowter yourself, via the app, without an installer or fitting. Then attach it to the asset and it’s ready to go. Thanks to its IP67 housing, that works both indoors and outdoors, in virtually any conditions.
Tab titel
Automatic updates
Software and firmware are updated via FOTA (Firmware Over-The-Air), without anyone having to visit or move the tracker. Even when the tracker is at the most remote spot of the operation.
60 motorbikes tracked live at Challenge Almere-Amsterdam
When an incident is reported along the course, the Challenge Almere-Amsterdam organisers need to know straight away which motorbike is closest. That used to mean radio calls and pins on a map on the wall. Now every motorbike carries an AT-4, and the event control center sees all 60 of them live on one map in Flowter.
The first hybrid IoT ecosystem
The AT-4’s location data goes straight to Flowter, even without a gateway nearby. There it forms one overview together with the rest of the fleet and equipment: what’s moving, what’s standing still and where it is. This lets you steer on efficiency, compliance, sustainability and safety.
Read more about the GPS-Buddy AT-4
Frequently asked questions and answers. Is your question not listed? Then contact us.
Does the AT-4 need a gateway?
No. The AT-4 has its own GPS and 4G and sends its location directly to Flowter, without the need for a gateway.
How often does the AT-4 send its location?
That’s configurable, from once a day to once a minute.
What happens if the AT-4 temporarily has no connection?
The tracker stores the location data internally and sends it as soon as the connection is restored.
How long does the battery last?
Up to one and a half years on a single charge, at one ping per day. More frequent pings shorten battery life.
